I'm one of 'those' gardeners that despite having what seems like a hundred unfinished projects on the go I am always on the look out for inspiration for more to do. As a consequence of this I am adicted to 'Pinterest' and sadly can admit to spending a ridiculous amount of time on it most evenings.
The weather here has prevented any kind of gardening for some time now, I can't even mow the lawns as it's too wet and on the days when it's just cold rather than rainy it's just too windy to get motivated.
This has given me time to add to my growing 'Pinterest' folders and I thought that as I have nothing to show from my own garden right now I would post some wonderful garden projects that are cheap and easy to do - I'm all for cheap (preferably free) and easy.
I found these concrete globes on 'the garden glove' along with a fabulous tutorial with 4 different recipes depending on the finished look you prefer. For me it would have to be the pure cement one for 2 reasons - 1) Cheaper - I'm not into buying ingredients if I can help it and 2) I think it would lend itself to spray paint alot nicer than the others.
I came across this next project on 'Creek Tree USA' and they describe these as ceramic hummingbird feeders, obviously I would have no need for that here (though maybe Bee or Butterfly feeders) but I thought they would make the cutest plant supports with very little cost or time.
Pretty door knobs are selling for a couple of pounds for a set of 4 in many of the cheaper stores (none of which I have here) and the right gauge wire would only cost a few pounds too. It would be very easy to attach the wire to the door knobs and voila - no more poked eyes.
Hopefully this year we will be building new pillars at the top gate and I have always wanted to add a Narnia style lamp to the side of them. I did some research on the lamps though and to get the exact one I wanted I wasn't going to get much change from £400, plus the cost of then running electrics up to it. I turned to Pinterest to find an alternative.
This guy, Mark, has come up with the answer for me and I'll definitely be doing it. He's constructed a Narnia style lamp from wood and best of all he's included a solar light to the top so no need for wiring. It may not be the exact style I was looking for but it can easily be adapted to what I want and the guy has even done a video tutoral on it. Check it out on 'Mark's DIY solar lamp post'.
This next project is so simple and obvious yet I never would have thought of it in a million years. I'm always thinking that I wish decking was a bit more comfortable underfoot so I could go outside barefoot in summer, obviously a rug isn't going to last too long out there and will only end up smushy and horrible. Not now!
Laura from 'Design share' has given us a fab tutorial on how to turn a tablecloth into a waterproof patio / decking rug - imagine all the wonderful colour and pattern choices available. This is a definite project for me this year.
I have no lighting in my garden currently - I must be one of the few people who just hasn't got round to it - and so I'd like to start adding a few pieces especially around the patio seating areas. I'm not really into buying the ones on stakes though because I can get a bit OCD about them being perfectly upright but I found this great idea (one of many on Pinterest), unfortunately I cannot find an original link to who created it but the photo speaks for itself - vases, stones and solar lights.
Again I cannot find a direct link to the creator of this next one but I like it so much I wanted to include it. It really is a simple idea and seeing as I have all the ingredients to put it together I will definitely be doing this to add some attraction to my garden. I'm not sure how to do the knot but I'm sure a google search will be productive.
I have plenty of wood scraps laying around, usually I put them in the log shed for winter fuel but now I have seen these I think my garden will instead be plastered with scrap wood animals. I'm not sure whether I want a moose but definitely dogs, horses, hens etc.
'Painted Therapy' provides a good tutorial using a Silhouette Cameo but I think I'd prefer to freehand draw.
Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts
Saturday, 30 May 2015
Garden DIY projects
Labels:
cane toppers,
concrete globes,
Decking,
DIY,
Garden design,
Garden stakes,
lamp,
Pallet wood,
Pallets,
Patio,
plant stakes,
project,
Projects,
solar lamp,
solar light,
tutorial,
waterproof decking rug,
whimsey
Thursday, 30 April 2015
Pallet wood Adirondack chairs
My garden really is taking some neglect of late. I really should be much further along with the re-design than am I, in fact to be honest I've done nothing out there since my last post. It's not from a lack of caring though it's down to the fact that I've been super busy in the workshop building furniture for the new decking (that isn't even in place yet) and building planters for Roses.
I was super surprised the other day when my daughter came home from work with a boot full of plants that were headed for the skip, once I've sorted through them I'll post pix but I know for definite I'm making a hedge from the amount of Viburnum Tinus I now have.
For now though I'm simply going to show you my latest project. Remember the Adirondack chairs I made last year? (or the year before - I forget), well I've made a second batch and MrTG has declared they far exceed the previous ones in both looks and comfort.
I couldn't find the exact plans I needed to make this design so I basically made it up as I went along but used inspiration from 3 seperate designs. Of course I made the footstools to match though I have since realised they don't actually match as they are angular on the ends as opposed to rounded like the chairs.
What i love most about these chairs is that they have cost me nothing more than time as all the wood is either from pallets or old stuff I have stored. All I have to do now is paint them and while I painted the last ones in 'Summer Damson' by Cuprinol I have chosed 'Fresh Rosemary' for these ones because I'm going much lighter on the new part of the garden.
The shade is actually a mintier green than is showing above.
Here's the Adirondack chairs I made previously. A very different style as they're more angular and don't have floating arms like the new ones do.
I was super surprised the other day when my daughter came home from work with a boot full of plants that were headed for the skip, once I've sorted through them I'll post pix but I know for definite I'm making a hedge from the amount of Viburnum Tinus I now have.
For now though I'm simply going to show you my latest project. Remember the Adirondack chairs I made last year? (or the year before - I forget), well I've made a second batch and MrTG has declared they far exceed the previous ones in both looks and comfort.
I couldn't find the exact plans I needed to make this design so I basically made it up as I went along but used inspiration from 3 seperate designs. Of course I made the footstools to match though I have since realised they don't actually match as they are angular on the ends as opposed to rounded like the chairs.
What i love most about these chairs is that they have cost me nothing more than time as all the wood is either from pallets or old stuff I have stored. All I have to do now is paint them and while I painted the last ones in 'Summer Damson' by Cuprinol I have chosed 'Fresh Rosemary' for these ones because I'm going much lighter on the new part of the garden.
![]() |
| Cuprinol Garden Shades 'Fresh Rosemary' |
Here's the Adirondack chairs I made previously. A very different style as they're more angular and don't have floating arms like the new ones do.
Labels:
Adirondack chairs,
design,
DIY,
pallet dismantling bar,
Pallet wood,
Pallets,
Recycled,
scrap wood,
scrapwood
Saturday, 7 February 2015
Pallet wood planter
My new workshop is now up and running ready for Spring and I couldn't be more chuffed and so grateful that Mr TG gave up one quarter of his own shed to make me my own area. I now have a 20ft by 20ft space with fabulous scaffold board work surfaces and every tool I imagine I will ever need - except for one of Mr TGs table saws which I have my eye on, I've never used one because they scare the heck out of me but I still need one lol.
So my first projects are pallet wood planters. I've made planters before and I didn't want just a bog standard boring square but I've made 6 sided ones before and tbh I can't remember the degrees etc so bog standard square it is.....with a little scallop included.
These take me one day to build and cost nothing to make cos it's all pallet wood
I know not many people will want a blow by blow account of how I made it so if that includes you then I guess you shouldn't read on. If however you want to make one and want to know how I did it then continue reading and I'll try to tell you as best as I can, plus you can learn from my many mistakes as we go.
First assemble your materials - I know this is common sense but when I made the prototype of this (I had no plans) I kinda made it up as I went along and by the time I was on my third panel I realised I was out of pallet wood that had the same dimensions as the other 2 panels and although it only made a teeny weeny increase it affected the entire structure.
So gather your pallet wood first ensuring you have enough of the same size for the 4 panels, my panels measured 20" high by the combined width of 4 pieces of pallet wood wide (14").
First I cut 16 pieces of pallet wood @20" high and 4 pieces of batten @ the width of the panel (I used pallet wood that was about 3.5" wide so we'll say the panel width was 14") We actually need 8 pieces of batten but we'll come to that later.
So, I lay 4 pieces of the 20" wood down on my workbench best side down as we're working on the inside of the planter here. I actually made use of this iron angle square screwed to my workbench and I cannot tell you how much it helped, not only did it help square everything up but it helped keep everything tight together.
Next I attached a scrap piece of wood across the centre to keep all those boards tight together (I forgot to photograph that though).
Next I started marking out the arches top and bottom of the panel. I made a pencil mark 2" in from either side at the top at the same at the bottom, then I took a huge round plate and placed the edges against those marks and traced round it to create the curve - I did this top and bottom.
Next I used a jigsaw to cut out the arch following my pencil line.
TIP: Once you have cut the arches out do not be tempted at this point to remove the scrap wood. I did that once and it was ridiculously annoying trying to get the arch back to shape.
Next make a pencil mark 3" up from the bottom and 3" down from the top on either side of the panel. Take your cut batten and screw it down to the panel making sure each end is flush with your pencil mark. Do this top and bottom and then remove the scrap piece from the middle.
Then turn your panel over and screw into those battens from this side also as this will help make it super secure - remember to pre-drill first and use a counter sinker if you like, I didn't in the prototype and the wood split terribly.
That's one panel complete and you now need to make one more exactly like that.
Next you need to make 2 more panels the same as the first two but with one slight difference, the batten pieces need to be shorter to enable the entire structure to fit together.
To get the desired width of the shorter battens I simply held up the two finished panels against my new panel and measured the width required. This next photo shows you the process and the yellow pencil shows the width I need to take the measurement of
Fix the shorter battens in place 3" up from the bottom and 3" down from the top as you did on the other two panels. Once that's done pre-drill and screw in from the front again and then make another panel exactly the same.
You should now have 4 panels looking like these
The next bit couldn't be simpler - construct a box with the four panels.
Then pre-drill pilot holes and screw the sides together, again using the counter sinker if you like - this made it easier when I gave it a light sand too as there were no screw heads to rip paper on.
Once constructed this is what the inside will look like (those shorter battens suddenly make sense).
Next I cut 3 pieces of scrap wood and screwed them to the bottom battens to form a base, I left gaps between so that I can puncture the lining to allow water to drain.
For the liner I would usually use some of Mr TGs DPM poly as it's really thick but I was feeling particularly lazy and wanted to use what was to hand - bin liners!
As it happened these particular bin liners were a perfect fit and I secured it by stapling it to the top batten supports with my nail gun.
To hide the plastic and the staples I cut some really thin laths to fit around the top of the battens and nailed them in place.
Finally a quick sand down with 60 grit and then another quick going over with 240 grit and a coat of external varnish and the job was done.
My instructions may make this seem difficult but it really couldn't have been simpler to make nor quicker. It used minimal wood and cost nothing and a rose is going to look lovely in it.
I'm currently working on other planters, I'm hoping my mitre saw will cut accurate angles for an 8 sided planter and I'm trying to work out a square planter that staggers outward - could take a while.
So my first projects are pallet wood planters. I've made planters before and I didn't want just a bog standard boring square but I've made 6 sided ones before and tbh I can't remember the degrees etc so bog standard square it is.....with a little scallop included.
These take me one day to build and cost nothing to make cos it's all pallet wood
I know not many people will want a blow by blow account of how I made it so if that includes you then I guess you shouldn't read on. If however you want to make one and want to know how I did it then continue reading and I'll try to tell you as best as I can, plus you can learn from my many mistakes as we go.
First assemble your materials - I know this is common sense but when I made the prototype of this (I had no plans) I kinda made it up as I went along and by the time I was on my third panel I realised I was out of pallet wood that had the same dimensions as the other 2 panels and although it only made a teeny weeny increase it affected the entire structure.
So gather your pallet wood first ensuring you have enough of the same size for the 4 panels, my panels measured 20" high by the combined width of 4 pieces of pallet wood wide (14").
First I cut 16 pieces of pallet wood @20" high and 4 pieces of batten @ the width of the panel (I used pallet wood that was about 3.5" wide so we'll say the panel width was 14") We actually need 8 pieces of batten but we'll come to that later.
So, I lay 4 pieces of the 20" wood down on my workbench best side down as we're working on the inside of the planter here. I actually made use of this iron angle square screwed to my workbench and I cannot tell you how much it helped, not only did it help square everything up but it helped keep everything tight together.
Next I attached a scrap piece of wood across the centre to keep all those boards tight together (I forgot to photograph that though).
Next I started marking out the arches top and bottom of the panel. I made a pencil mark 2" in from either side at the top at the same at the bottom, then I took a huge round plate and placed the edges against those marks and traced round it to create the curve - I did this top and bottom.
Next I used a jigsaw to cut out the arch following my pencil line.
TIP: Once you have cut the arches out do not be tempted at this point to remove the scrap wood. I did that once and it was ridiculously annoying trying to get the arch back to shape.
Next make a pencil mark 3" up from the bottom and 3" down from the top on either side of the panel. Take your cut batten and screw it down to the panel making sure each end is flush with your pencil mark. Do this top and bottom and then remove the scrap piece from the middle.
Then turn your panel over and screw into those battens from this side also as this will help make it super secure - remember to pre-drill first and use a counter sinker if you like, I didn't in the prototype and the wood split terribly.
That's one panel complete and you now need to make one more exactly like that.
Next you need to make 2 more panels the same as the first two but with one slight difference, the batten pieces need to be shorter to enable the entire structure to fit together.
To get the desired width of the shorter battens I simply held up the two finished panels against my new panel and measured the width required. This next photo shows you the process and the yellow pencil shows the width I need to take the measurement of
Fix the shorter battens in place 3" up from the bottom and 3" down from the top as you did on the other two panels. Once that's done pre-drill and screw in from the front again and then make another panel exactly the same.
You should now have 4 panels looking like these
The next bit couldn't be simpler - construct a box with the four panels.
Then pre-drill pilot holes and screw the sides together, again using the counter sinker if you like - this made it easier when I gave it a light sand too as there were no screw heads to rip paper on.
Once constructed this is what the inside will look like (those shorter battens suddenly make sense).
Next I cut 3 pieces of scrap wood and screwed them to the bottom battens to form a base, I left gaps between so that I can puncture the lining to allow water to drain.
For the liner I would usually use some of Mr TGs DPM poly as it's really thick but I was feeling particularly lazy and wanted to use what was to hand - bin liners!
As it happened these particular bin liners were a perfect fit and I secured it by stapling it to the top batten supports with my nail gun.
To hide the plastic and the staples I cut some really thin laths to fit around the top of the battens and nailed them in place.
Finally a quick sand down with 60 grit and then another quick going over with 240 grit and a coat of external varnish and the job was done.
My instructions may make this seem difficult but it really couldn't have been simpler to make nor quicker. It used minimal wood and cost nothing and a rose is going to look lovely in it.
I'm currently working on other planters, I'm hoping my mitre saw will cut accurate angles for an 8 sided planter and I'm trying to work out a square planter that staggers outward - could take a while.
Sunday, 11 January 2015
Storm damage!
These recent storms have wreaked havoc here in Caithness and the Orkneys and so many people have experienced damage to homes and properties. We were lucky to a degree as we didn't suffer any damage to the house (testament to MrTGs fabulous building skills) nor to 90% of the land and for that I am extremely grateful.
My garden (and therefore my own building skills) did not fair quite so well. In fact when I got up yesterday morning and noticed that despite 100 mile an hour winds the open land we have was debris free and the sheds and the poly tunnel were still standing in one piece, I was secretly smug - after all we had been told to expect some degree of damage.
You can well imagine my total shock then as I stood at the rear patio doors, crunchy nut cornflakes in hand and saw this
The wishing well that you can see on its side in the very top of the above image weighed so much that initially it had to be moved into place in 2 parts by a digger and then built on site. Yet this wind toppled it right over and as it went down it took down a Yucca that I loved. The Yucca self seeded itself a few years ago and has grown well since then - it's now disappeared from view.
The pergola was actually bolted down as well yet that has also been demolished.
This fence has took some serious batterings over the years but until this year has never actually been damaged.
Honestly, I was gutted! I seriously could have cried.
When I informed MrTG of what had happened I have to say I was unimpressed with his response - it didn't even warrant getting out of bed to take a look and then say nice things to make me feel better. OK so there was a power cut and no real reason to get up but that's not the point!
I should have realised that he understood how upset I was though because today he was out there fixing what could be fixed and helping me attempt to save the Yucca that had been flattened.
I don't hold out much hope for this Yucca because about 1/3rd of the trunk was snapped at the base but I'm not ready to give up on it when so much of it was still intact - you never know it might sprout from the base. So I held it upright while MrTG bashed a support into the ground so I could then tie the Yucca to it - the support is actually a scaffold pole and because they're hollow they go well into the ground, this one is at least 3ft down. It aint moving!
I then packed some straw round the base and held it down with the slates that had come off the wishing well roof. This is only a temporary repair but it will suffice for now.
MrTG then set to on refixing the pergola that I built a couple of years ago.
I guess he did understand my dissappointment and sorrow after all - love him!
Of all the things that got destroyed in the courtyard area of the garden there was one thing that got blown about and yet still managed to stay in one piece.
That is the birdbath I made a couple of years ago from old vases and bowls all stuck together with clear silicon. Glass held together with silicon and not one bit of it breaks - bizarre!
I hope you guys all got off lightly in the recent storms. I have to admit we were lucky - garden damage is nowhere near as devastating as damge to life or home and for that I'm grateful.
My garden (and therefore my own building skills) did not fair quite so well. In fact when I got up yesterday morning and noticed that despite 100 mile an hour winds the open land we have was debris free and the sheds and the poly tunnel were still standing in one piece, I was secretly smug - after all we had been told to expect some degree of damage.
You can well imagine my total shock then as I stood at the rear patio doors, crunchy nut cornflakes in hand and saw this
The wishing well that you can see on its side in the very top of the above image weighed so much that initially it had to be moved into place in 2 parts by a digger and then built on site. Yet this wind toppled it right over and as it went down it took down a Yucca that I loved. The Yucca self seeded itself a few years ago and has grown well since then - it's now disappeared from view.
The pergola was actually bolted down as well yet that has also been demolished.
This fence has took some serious batterings over the years but until this year has never actually been damaged.
Honestly, I was gutted! I seriously could have cried.
When I informed MrTG of what had happened I have to say I was unimpressed with his response - it didn't even warrant getting out of bed to take a look and then say nice things to make me feel better. OK so there was a power cut and no real reason to get up but that's not the point!
I should have realised that he understood how upset I was though because today he was out there fixing what could be fixed and helping me attempt to save the Yucca that had been flattened.
I don't hold out much hope for this Yucca because about 1/3rd of the trunk was snapped at the base but I'm not ready to give up on it when so much of it was still intact - you never know it might sprout from the base. So I held it upright while MrTG bashed a support into the ground so I could then tie the Yucca to it - the support is actually a scaffold pole and because they're hollow they go well into the ground, this one is at least 3ft down. It aint moving!
I then packed some straw round the base and held it down with the slates that had come off the wishing well roof. This is only a temporary repair but it will suffice for now.
MrTG then set to on refixing the pergola that I built a couple of years ago.
I guess he did understand my dissappointment and sorrow after all - love him!
| He did straighten it up I promise lol. |
That is the birdbath I made a couple of years ago from old vases and bowls all stuck together with clear silicon. Glass held together with silicon and not one bit of it breaks - bizarre!
I hope you guys all got off lightly in the recent storms. I have to admit we were lucky - garden damage is nowhere near as devastating as damge to life or home and for that I'm grateful.
Labels:
DIY,
Plant supports,
Plants,
repairs,
Storm,
wind damage,
winds,
wishing well. pergola,
Yucca
Saturday, 8 November 2014
Garden rejuvenation
It's looking very bland outside now and I'm loving it. It may sound strange for a gardener to admit that but I love, love, love this time of year, not only do I get to prune, chop and tidy everything up ready for next year but I get a better idea of what is right and what is wrong with the garden.
Already I can see that I need more evergreen interest and structure in the garden so this is something I'm going to be getting ready for spring planting - so exciting!
The time has also arrived whereby I can begin to clear and plan the second half of my garden that I was supposed to do this year.
I'm not sure of the actual size of this part of the garden as I'm too lazy to measure it (so you can well imagine how good/reliable my plans are going to be), suffice to say it's pretty big.
Unfortunately I have to carry the theme on from the rest of the garden which is already pretty much finished. I say 'unfortunately' because I made the biggest mistake of designing what was easiest NOT what I wanted, I ended up with straight edges finished with sleepers whereas I love curvy beds where you cannot see what is coming next.
As it stands right now it may not look too daunting but the very far end and side is full of plants and weeds and it's going to take a whole heap of hard work for me to sort it, not least because I first have to remove a ton of gravel and polythene that was laid years ago to supposedly suppress weeds - who knew weeds germinate in gravel.
It's going to take wuite some time to work out what is salvageable in that lot and what isn't.
Already I can see that I need more evergreen interest and structure in the garden so this is something I'm going to be getting ready for spring planting - so exciting!
The time has also arrived whereby I can begin to clear and plan the second half of my garden that I was supposed to do this year.
I'm not sure of the actual size of this part of the garden as I'm too lazy to measure it (so you can well imagine how good/reliable my plans are going to be), suffice to say it's pretty big.
Unfortunately I have to carry the theme on from the rest of the garden which is already pretty much finished. I say 'unfortunately' because I made the biggest mistake of designing what was easiest NOT what I wanted, I ended up with straight edges finished with sleepers whereas I love curvy beds where you cannot see what is coming next.
As it stands right now it may not look too daunting but the very far end and side is full of plants and weeds and it's going to take a whole heap of hard work for me to sort it, not least because I first have to remove a ton of gravel and polythene that was laid years ago to supposedly suppress weeds - who knew weeds germinate in gravel.
It's going to take wuite some time to work out what is salvageable in that lot and what isn't.
Wednesday, 5 November 2014
DIY concrete planter
I seem to spend an awful lot of time scouring 'Pinterest' at the moment, there is something so very addictive about pinning images of things I want to create or of gardens I think are amazing and at the moment pinning images for Christmas.
I'm sure most people are aware of Pinterest and what it's all about and no matter how many times I go on I still get a thrill each time I see one of my own images pinned by another viewer. 99% of the time there is a backlink to the blog post that the pinner found my image on and I guess I should be more upset and pro active the times where the link - or any mention of me - are absent but I just can't bring myself to follow it all through, I guess I'm happy to accept that as soon as I put an image out there in the netherspace that it pretty much becomes open to the cyberworld to be used as people will. I know we all have rights etc etc and many people protect and police their images methodically and I guess I would too if my livelihood depended it, alas..........
Anyway I digress, I was supposed to be mentioning an image I found on Pinterest, and has been all over FB too, of someone who made garden pots out of old towels and cement/hypertufa. Of course I kept promising myself that I would give it a go at some point but tbh I can be a lazy gardener so often have a list of 'things to make' that should actually read 'things I'm too lazy to make'. Anyway one day a few weeks ago I decided to take the plunge and give it a go, here's the image that captured my eye
and here's the link to website (because I'm polite like that) Thehypertufagardener
My main problem is that like I stated before I can be a lazy gardener and I'm likely to lose interest in something if I have to keep rumaging around looking for things - I get distracted very easily, so i had to make sure I had all the equipment on hand to do this job. As it turned out I didn't read it properly anyway and so didn't realise that I shouldn't be using just cement - but oh well!
First I have to state the obvious, this is one messy job! Yes, I kind of did realise it would be but from the Youtube videos I watched of a lady swooshing the cement around and everything being neatly in place I thought the mess would be minimal - not so!
I mixed the cement up in a wheelbarrow to the consistency stated on Youtube (pancake batter basically) and excitedly dumped that towel in the mix (donning the marigolds of course). This wasn't as easy as I thought it would be - the towel didn't 'soak' the mix up like I thought it would and actually it just kept sliding off when I picked the towel up, also despite having a barrow full of cement it was barely enough for this bath sheet of a towel I was using.
I thinned the mixture a little and finally got to the point where I could chuck the cement towel over an upturned bucket which in turn was sitting on a table.
This is where my lack of attention to detail showed again - I did put a plastic sheet on the bucket so that the towel wouldn't stick to the bucket when it dried but a) the plastic was way too small and b) the towel just stuck to the plastic instead. If I do this again I would position the towel over an upturned plastic plant pot that could then stay inside.
Once the towel was over the bucket it was simply a case of messing with the flaps and folds to make it look nice and layering on more cement mix - this took more time than you would think.
See the mess!
I left this to dry for days and days, basically because I realised I should have used hypertufa so figured the thing wouldn't be right anyway.
When I did venture back to look at it I realised it had actually set - yay! BUT, it had stuck to that blue bucket as well which wasn't covered in plastic so I heard alot of crunching and cracking as I broke it away.
The finished product looks pretty naff it has to be said and for several reasons 1) I used too big a towel. 2) I didn't use the right polythene. 3) I didn't use enough polythene. 4) I used cement rather than hypertufa. 5) I didn't cover the folds evenly with cement so it still has that towelling look in many places. 6) because it's cement on a towel it has a flexibility to it.
The finished look
Can't say that I am in a rush to give this a go again - I'm too impatient.
I'm sure most people are aware of Pinterest and what it's all about and no matter how many times I go on I still get a thrill each time I see one of my own images pinned by another viewer. 99% of the time there is a backlink to the blog post that the pinner found my image on and I guess I should be more upset and pro active the times where the link - or any mention of me - are absent but I just can't bring myself to follow it all through, I guess I'm happy to accept that as soon as I put an image out there in the netherspace that it pretty much becomes open to the cyberworld to be used as people will. I know we all have rights etc etc and many people protect and police their images methodically and I guess I would too if my livelihood depended it, alas..........
Anyway I digress, I was supposed to be mentioning an image I found on Pinterest, and has been all over FB too, of someone who made garden pots out of old towels and cement/hypertufa. Of course I kept promising myself that I would give it a go at some point but tbh I can be a lazy gardener so often have a list of 'things to make' that should actually read 'things I'm too lazy to make'. Anyway one day a few weeks ago I decided to take the plunge and give it a go, here's the image that captured my eye
and here's the link to website (because I'm polite like that) Thehypertufagardener
My main problem is that like I stated before I can be a lazy gardener and I'm likely to lose interest in something if I have to keep rumaging around looking for things - I get distracted very easily, so i had to make sure I had all the equipment on hand to do this job. As it turned out I didn't read it properly anyway and so didn't realise that I shouldn't be using just cement - but oh well!
First I have to state the obvious, this is one messy job! Yes, I kind of did realise it would be but from the Youtube videos I watched of a lady swooshing the cement around and everything being neatly in place I thought the mess would be minimal - not so!
I mixed the cement up in a wheelbarrow to the consistency stated on Youtube (pancake batter basically) and excitedly dumped that towel in the mix (donning the marigolds of course). This wasn't as easy as I thought it would be - the towel didn't 'soak' the mix up like I thought it would and actually it just kept sliding off when I picked the towel up, also despite having a barrow full of cement it was barely enough for this bath sheet of a towel I was using.
I thinned the mixture a little and finally got to the point where I could chuck the cement towel over an upturned bucket which in turn was sitting on a table.
This is where my lack of attention to detail showed again - I did put a plastic sheet on the bucket so that the towel wouldn't stick to the bucket when it dried but a) the plastic was way too small and b) the towel just stuck to the plastic instead. If I do this again I would position the towel over an upturned plastic plant pot that could then stay inside.
Once the towel was over the bucket it was simply a case of messing with the flaps and folds to make it look nice and layering on more cement mix - this took more time than you would think.
See the mess!
I left this to dry for days and days, basically because I realised I should have used hypertufa so figured the thing wouldn't be right anyway.
When I did venture back to look at it I realised it had actually set - yay! BUT, it had stuck to that blue bucket as well which wasn't covered in plastic so I heard alot of crunching and cracking as I broke it away.
The finished product looks pretty naff it has to be said and for several reasons 1) I used too big a towel. 2) I didn't use the right polythene. 3) I didn't use enough polythene. 4) I used cement rather than hypertufa. 5) I didn't cover the folds evenly with cement so it still has that towelling look in many places. 6) because it's cement on a towel it has a flexibility to it.
The finished look
Can't say that I am in a rush to give this a go again - I'm too impatient.
Wednesday, 24 September 2014
Garden ressurection
This year gardening has taken a different turn for me. I've finally admitted after another year of wasted veggie growing that I really do want to take a break from it for a while - just the veggie growing though.
I begin every new year with the renewed interest and excitement about growing Sweetcorn and onions etc the same way every gardener does I guess but over the last couple of seasons I've noticed it has become a chore rather than an interest and all those lovely veggies I sow and tend to slowly but surely get neglected to the point where they're just left to their own devices - and seeing as they're in a polytunnel they soon succumb to thirst.
I thought maybe I was just trying to grow too much because I have the space so this year I grew just what I knew we liked to eat as a family - Sweetcorn, Cucumber, Strawberries, Beans, Courgette and onion - but even those have been left to rot away, in fact the strawberry runners have just about made their way out of the polytunnel door in search of water.
I haven't even kept on top of the Sweetpea this year and that is the one plant I love to grow every single year as a cut flower. It's usually still producing plenty of flowers this time of year however whereas the garden sweetpea is still in flower the ones in the PT are well into seed now.
So I have decided, next year I am NOT growing fruit and veg (oh yes the apples have all been left to drop and rot too). My polytunnel will get an overhaul, the beds will be renewed and maybe even a different layout installed, I'm not even going to do the cut flowers next year (least I don't think so).
2015 is going to be the year I concentrate on renovating the second half of my garden and it's going to be epic. I have so many ideas floating around - thanks to Pinterest - and I can't wait to begin tearing everything up, building and planting.
So I've been watching the garden more keenly this year to see what works and what doesn't, what plants are thriving and what is just limping along and I have plenty of cuttings taken and a load of new plants waiting for a home.
Here's a few pix of part of the mess I'll be tackling next year, it looks like a lot of green healthy growth and plants but it's really not, there's the odd few decent shrubs and perennials in there (mostly in the wrong place) but it's mainly weeds.
The next picture shows the Leycesteria that has self seeded everywhere. It's a lovely plant and I'm loathe to take any out especially as it tolerates the sever gales we get here but it's getting way too invasive and greedy now. The Hebe to the right is about 13 years old now and is huge, it flowers twice a year and takes a real battering in the winter.
The tall plant in the back centre of the next picture is a Rose bush, it flowers profusely every year and never suffers from blackspot like most of the others however it always (without fail) seems to flower in time for a downpour of rain and then the blooms rot immediately.
The grass in the above picture is so invasive it's ureal, I've been pulling that stuff out for years but you only have to miss one root and it pops up all over again. There are a couple of Rose bushes in there also but they never really did well even before all the rest of the stuff grew so I'll probably dispose of them - though I may plant them elsewhere just out of curiosity to see if they grow better.
I begin every new year with the renewed interest and excitement about growing Sweetcorn and onions etc the same way every gardener does I guess but over the last couple of seasons I've noticed it has become a chore rather than an interest and all those lovely veggies I sow and tend to slowly but surely get neglected to the point where they're just left to their own devices - and seeing as they're in a polytunnel they soon succumb to thirst.
I thought maybe I was just trying to grow too much because I have the space so this year I grew just what I knew we liked to eat as a family - Sweetcorn, Cucumber, Strawberries, Beans, Courgette and onion - but even those have been left to rot away, in fact the strawberry runners have just about made their way out of the polytunnel door in search of water.
I haven't even kept on top of the Sweetpea this year and that is the one plant I love to grow every single year as a cut flower. It's usually still producing plenty of flowers this time of year however whereas the garden sweetpea is still in flower the ones in the PT are well into seed now.
So I have decided, next year I am NOT growing fruit and veg (oh yes the apples have all been left to drop and rot too). My polytunnel will get an overhaul, the beds will be renewed and maybe even a different layout installed, I'm not even going to do the cut flowers next year (least I don't think so).
2015 is going to be the year I concentrate on renovating the second half of my garden and it's going to be epic. I have so many ideas floating around - thanks to Pinterest - and I can't wait to begin tearing everything up, building and planting.
So I've been watching the garden more keenly this year to see what works and what doesn't, what plants are thriving and what is just limping along and I have plenty of cuttings taken and a load of new plants waiting for a home.
Here's a few pix of part of the mess I'll be tackling next year, it looks like a lot of green healthy growth and plants but it's really not, there's the odd few decent shrubs and perennials in there (mostly in the wrong place) but it's mainly weeds.
The next picture shows the Leycesteria that has self seeded everywhere. It's a lovely plant and I'm loathe to take any out especially as it tolerates the sever gales we get here but it's getting way too invasive and greedy now. The Hebe to the right is about 13 years old now and is huge, it flowers twice a year and takes a real battering in the winter.
The tall plant in the back centre of the next picture is a Rose bush, it flowers profusely every year and never suffers from blackspot like most of the others however it always (without fail) seems to flower in time for a downpour of rain and then the blooms rot immediately.
The grass in the above picture is so invasive it's ureal, I've been pulling that stuff out for years but you only have to miss one root and it pops up all over again. There are a couple of Rose bushes in there also but they never really did well even before all the rest of the stuff grew so I'll probably dispose of them - though I may plant them elsewhere just out of curiosity to see if they grow better.
Labels:
design,
DIY,
Flora,
Flowers,
garden,
Garden design,
Garden planning,
renovation
Tuesday, 3 June 2014
DIY pallet wood decking
I finally got round to building the new deck on the back garden - with the help of Mr TG of course. I'm guessing it would have been less hassle to simply buy in some decent timbers and regular decking boards but I didn't want to spend a penny on this decking so despite Mr TGs reservations I insisted we use pallets and pallet wood.
I have to admit that there were several points in the first few hours of trying to lay pallets level and square when I wondered what on earth I was doing and seriously doubted my ability to see it through.
Levelling the initial layer of pallets was tedious, annoying and .....well....blinkin boring but I managed to get a base layer we could work from
Ideally I would have liked it much much bigger but I guess that's what happens when these things aren't planned within the original garden design - the rest of the patio shape and beds meant I couldn't really do one much bigger.
Once the pallets were layed we then had to create steps to the french doors and then start laying pallet wood over the top of everything to create a nice look.
I did like the weathered look of the boards and because I hate buying materials I would happily have left the boards just like that but Mr TG felt they needed some decking stain so that was our one and only expense on the decking. I used Ronseals decking stain as they were on a buy one get one half price offer and I figured I'd need the two tubs as they were only 2.5 litres each. As it turned out I used about 2 3rds of one tub only.
I know alot of people would prefer to buy the proper materials but I honestly love this decking. I was so chuffed last year when I managed to make a temporary deck from sleepers and scaffold boards but it was only big enough for one plastic chair, this one is plenty roomy enough for the two wooden chairs I made, the electric reel table I made, the chiminea and plenty of flower pots plus our bargain £5 parasol.
Here's the previous deck compared to the new one and the best bit is that the whole thing can be easily moved when Mr TG harls the house walls this year.
Now I get to relax out there and enjoy the view
I have to admit that there were several points in the first few hours of trying to lay pallets level and square when I wondered what on earth I was doing and seriously doubted my ability to see it through.
Levelling the initial layer of pallets was tedious, annoying and .....well....blinkin boring but I managed to get a base layer we could work from
![]() | ![]() |
Ideally I would have liked it much much bigger but I guess that's what happens when these things aren't planned within the original garden design - the rest of the patio shape and beds meant I couldn't really do one much bigger.
Once the pallets were layed we then had to create steps to the french doors and then start laying pallet wood over the top of everything to create a nice look.
![]() | |
I did like the weathered look of the boards and because I hate buying materials I would happily have left the boards just like that but Mr TG felt they needed some decking stain so that was our one and only expense on the decking. I used Ronseals decking stain as they were on a buy one get one half price offer and I figured I'd need the two tubs as they were only 2.5 litres each. As it turned out I used about 2 3rds of one tub only.
![]() | |
I know alot of people would prefer to buy the proper materials but I honestly love this decking. I was so chuffed last year when I managed to make a temporary deck from sleepers and scaffold boards but it was only big enough for one plastic chair, this one is plenty roomy enough for the two wooden chairs I made, the electric reel table I made, the chiminea and plenty of flower pots plus our bargain £5 parasol.
Here's the previous deck compared to the new one and the best bit is that the whole thing can be easily moved when Mr TG harls the house walls this year.
![]() |
Now I get to relax out there and enjoy the view
![]() | ![]() |
Subscribe to:
Posts (Atom)










































